To install the Crolla i-Size 360 ​​Isofix car seat with Support Leg in a Toyota Alphard, follow these simple steps:

1️⃣Position the Car Seat
Place the Crolla i-Size 360 car seat on one of the rear seats in your Toyota Alphard. Ensure the seat has ISOFIX anchor points.

2️⃣Extend the ISOFIX Connectors
Pull out the ISOFIX connectors from the base of the car seat. Align these connectors with the ISOFIX anchor points on the car seat. Push them in until you hear a 'click' sound, indicating they are securely attached.

3️⃣Check the ISOFIX Indicators
Ensure the ISOFIX indicators turn green, confirming that the seat is correctly and securely attached to the vehicle.

4️⃣Deploy the Support Leg
Pull down the Support Leg from the front of the car seat. Adjust its length until it firmly touches the floor of your Alphard. Ensure the leg is stable and that the indicator on the leg shows green, signaling that it's properly positioned.

5️⃣Rotate the Car Seat
Use the 360-degree rotation feature to adjust the car seat to your desired orientation (rear-facing for infants and forward-facing for older children). This feature is especially handy when placing or removing your child from the seat.

6️⃣Secure the Harness
Place your child in the seat and secure them using the internal harness. Make sure the harness is snug and correctly fastened according to the seat's instructions.

7️⃣Final Safety Checks
Double-check that the car seat is securely fastened and that the Support Leg is correctly positioned. The seat should not move more than 1 inch in any direction if properly installed.
By following these steps, the Crolla i-Size 360 car seat with ISOFIX and Support Leg will be safely installed in your Toyota Alphard, providing your child with a safe and comfortable ride.

свернуть