How's it going guys?!
It's been a long time coming, but we are finally installing meth injection on the Audi b8.5 s4!
That's right it's time to cool down that intake, and start making some real power.
Now this isn't going to be as in depth as our previous video, solely because there's just too much wiring involved. However, we did give an over view of our setup and what we used for voltage points.
If you have any questions, please comment down below and we will help the best we can.
Thanks for watching, and Stay Tuned!
____________________________________________________________________________
This Tutorial is provided as a courtesy by Boost Dynamic Tuning
Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (Including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise safety.
Although this material has been prepared with the intent to provide reliable information, no warranty (Express or implied) is made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance on this material.
SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS MATERIAL.
In no event will Boost Dynamic Tuning, LLC or its affiliates be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this material.
