How to build a bar for your house or restaurant.
In this video we show how to build a bar using 2x4 Douglas fir for the framing and 1x6 cedar planks for the siding. In this video we go over how to toenail corners and how to stain the bar top.
Overall dimensions of the bar are as followed.
The bar is 48 inches wide with 24 inch returns on each side.
This bar is approximately 42 inches high with casters and bar top.
The bar top itself is overall 63 inches wide on each 24 inch return the bar top is 30 inches deep in the center of the bar bar top is 18 inches deep .
For the bar top, we used 2x12 cut and placed next to each other to create bar depth.
As far as the frame of the bar goes, we used 2 x 4 x 10’ Douglas fir approximately eight pieces cut to lengths needed.
And the wooden planks we used for the bar are a 1x6x6ft roughhewn Cedar dogeared fence plank purchase from Home Depot and trimmed and cut to size. We used approximately 22 planks overall.
The bar top was a 2 x 12 x 12’ cut down to size as needed. As well Douglas fir.
We used 4=2 inch casters with locks.
We also used one screw on a bottle opener, satin nickel, and a screw on hook as well as one brand new 1 gal paint can not used to catch the beer caps.
We used a Vera than Stan, as well as a clear-coat sealer.
All the nails we used are galvanized brad nails, and screws we used were all exterior grade deck rated screws.
By: Co-Know-Pro Construction Tips
Please subscribe, like and share! Thanks for your support!
@co-know-proconstructiontips
#Co-Know-Pro Construction Tips
#diy #tips #diy #builder #construction #woodworking #carpentry #carpenter #cooltools.
