In this video, I answered some of the most common questions about paint prep, primer, sandpapers, air compressors, and pearls. I hope this helps you get started on your next project with confidence! ⬇️ Get a FREE Auto Body & Paint Manual Here: [ Ссылка ]
📌 Spray Paint Gun (ATOM-X88 Bluemoon Edition) [ Ссылка ]
📌 Spray Gun Light (GUNBUDD) [ Ссылка ]
00:00 Auto Body and Paint Q&A
0:09 Question#1: 1950s enamel repaint. Want to scuff and all over. Paint is very solid. What grit. Sealer?
3:01 Question#2: I want to paint a rear spoiler I just purchase a Toyota Sequioa what sand paper can I prep with?
3:52 Question#3: I've heard that wetsanding makes the paper finer, so wetsanding a p600 would result in a p400 finish correct?
5:00 Question#4: Did you ever get your carb rebuilt or did you finally find a new one? Also, have you decided what you want to do with your keeper car yet (paint color wise)?
5:47 Question#5: You mentioned a few live feeds back that you could mix CC and BC together and make a somewhat SS paint. Didn't totally understand the mixture you recommended.
9:04 Question#6: I'm getting ready to spray single stage I primed with 2K primer 400-grit wet sand. Is there any benefit to using sealer or just wasting my money?
9:57 Question#7: After scuffing the front bumper, do I need adhesion promoter then primer or straight to BC?
11:20 Question#8: Does it help to presoak sandpaper before wet sanding?
11:44 Question#9: After sealer do you spray primer?
13:12 Question#10: What is the brand and model of your 60-gallon upright compressor? Also, does it run off 110 or 220, and is it bolted to the ground or just freestanding?
14:26 Question#11: Do you wet sand sealer before base or is it needed to apply base after the sealer's flash time?
14:52 Question#12: What do you prefer to preserve the OEM manufacturer stickers / vin when spraying in those areas? tape & razor?
16:11 Question#13: How long is too long to remove tape before it screws what you layed down?
17:22 Question#14: Is it true that using a DA sander causes “waves” that will show? final wet sanding with a block is preferred correct?
20:25 Question#15: If you have orange peel on a single stage after cleaning it up, should you sand with 400 and then clear?
21:11 Question#16: My 1st project had the orange peel effect, how did your 1st car project go?
23:03 Question#17: How much is the VIP now?
23:28 Question#18: What’s a good tip to use for a primer?
🆓Get Special FREE TRIAL offer to Learn Auto Body And Paint VIP: [ Ссылка ]
✅ Connect on Facebook for More FREE Updates: [ Ссылка ]
🚗Shop Here for Best Value Atom X Series Spray Guns: [ Ссылка ]
📲 Follow me on Instagram: [ Ссылка ]
#paintprep #primer #sandpapergrit
