I modified a Super Nintendo controller to build a custom SNES Portable. Raspberry Pi Zero build. Checkout Part 2 - [ Ссылка ]
.........................................................
Subscribe & check out my other tech restoration and mod videos!

Follow me on Instagram: [ Ссылка ]
Buy Me a Coffee 😄 : [ Ссылка ]

Filmed on: Samsung S10e

Music:
Back To The Future Jellyfish - NoMBe
Calvin Harris - josh pan

If the following Tools and Parts lists helped you, please considering leaving a comment :)
(not affiliate links)

Parts List:
- Original SNES Controller
- Raspberry Pi Zero
- WaveShare GamePi15 hat - [ Ссылка ]
- SanDisk Ultra 16GB MicroSD card - [ Ссылка ]
- Little Bird 3.7V 600mAh Lithium-Polymer Battery - [ Ссылка ]
- 30 pin, 0.8mm pitch, Flat Flex Cable (trimmed to 20 pin) - [ Ссылка ]_
- 28AWG silicon wire - [ Ссылка ]

Full parts list in Part 2.

Software:
PinkyPi X for the GamePi15
PinkyPi prebuilt image, based off RetroPie 4.5.1
Using fbcp-ili9341 display driver (60hz!!)
Using RetroGame GPIO controller driver.
Using PiSNES as default SNES emulator
From [ Ссылка ]

Tools:
- Yihua 936 Soldering Iron
- Yihua 2008D Hot Air Rework Station
- Ozito 170W Rotary Tool - [ Ссылка ]
- Drill Press (Aldi)
- Phillips Head #0 Screwdriver
- Custom fume extractor - [ Ссылка ]
- Tec 305-12 hot glue gun
- Kapton tape
- Goot Wick desoldering braid 3.0mm & 1.5mm - [ Ссылка ]
- KingBo RMA-218 Flux
- UNI-T UT71D Multi-meter
- Trojan Files
- Dick Smith Precision Pliers
- 240 Grit Sandpaper
- Rotary tool cutting blades (Ozito, Dremel, eBay)
- Woolworths Essentials dish detergent

свернуть