#Oskol makes it easier to insert and extract the #surface by separating the top and bottom pieces of the casing. Watch the video to learn how to do it.
Oskol is the casing for your optimal eye tracking experience Powered by #IRISBOND. Bond your #hiru with an iPad Pro 12.9 (5th or 6th generation) or a Surface Pro.
0:00 How to insert and remove your Surface from Oskol
0:37 Remove the mounting plate and 3 screws. The screws and plate are included in the box.
0:50 Separate the top and bottom pieces of the casing.
1:00 Push up on each side joint, until the top piece slides up.
1:15 Place the tablet in the bottom piece of the casing.
1:30 The bottom corners of the tablet should sit tightly in the casing.
1:54 Place the top piece over the the tablet. Slide the top piece down until it is in place.
2:17 The side joints and middle piece should fit together.
2:36 Place the screws in the back of the mounting plate.
3:01 Use an allen wrench to tighten.
3:31 Place the Hiru in the slot below.
3:53 Connect the cable.
4:11 Mount the casing for use.
Learn more about products at: [ Ссылка ]
Meet us at: [ Ссылка ]
