(We need 196 blue and 1 pink pieces 1 / 32nd size)
Let me show you how to make a paper swan in the art 3D origami. It’s a nice paper basket DIY.
Subscribe to get more paper craft ideas:
[ Ссылка ]
Timestamps for your convenience:
0:01 Hello! Let me show you how to make a paper swan of pieces origami. Also you can make a swan couple. Let’s begin.
Take 1 blue sheet of paper and 7 pink.
Take the paper sheet and cut it into 32 identical pieces. Repeat it after me.
0:29 Make pieces for a swan.
Make 196 blue and 1 pink rectangles.
Take one small rectangle and start folding the piece. Repeat it after me. If something doesn’t work out for you, you can always rewind and look again at lower speed. Fold it as I show.
That's all! We have a piece for 3D origami. The pieces size is called 1/32nd.
You should make the pieces pockets more comfortable for you. Just put one piece on another. Like this.
3:06 Make the right number of pieces. You can watch an interesting film or TV programs while you’re folding pieces. And time will pass faster.
3:24 We begin assembling the swan.
Take two pieces and place them with the short side up. Put on third piece. Place this triangle with the long side up. Take one piece. Put on one piece. And put on one piece in the third row.
The pieces must be place with the short side up in the first row. Place pieces in second and third row with the long side up.
In the first three rows you will need to make 10 pieces.
Keep doing the first three rows after me. One piece put on by short side and two pieces by long side.
When there are 10 pieces in the first row connect the base into a ring and secure it with one piece. And put on two more pieces in the third row.
Correct the figure a little.
You should have 10 pieces in each row.
Shape the figure into a bowl. With a finger on the back, press a little on the center.
And we begin to make the 4th row. Put on the pieces only by one pocket. Thus, we double the number of pieces in the fourth row. Correct the pieces if you need it. And put on the pieces in this way until you reach the end of the 4th row.
Well done! We have completed the assembly of the 4th row of the swan from origami pieces.
7:19 Putting the 5th row together. Try to keep your figurine from falling apart. If you find it difficult to assemble a swan without glue, then you can drip glue into the pockets of the pieces during assembly.
7:28 (How to glue pieces for 3D origami for beginners [ Ссылка ])
Put on the pieces by two pockets in 5th row. Place the pieces with the long side out. Put on 20 pieces in the fifth row. Continue putting on the pieces until you get to the beginning of the 5th row.
And we put on the last piece in this row. You should have such a design. If you did something wrong, don't worry. Just rewind a little and start making the swan again. The second time is always better!
8:55 We start assembling the 6th row. Slide one piece on with the short side. Slide the remaining 9 pieces with the long side out. Now slide 1 piece with the short side out. And 9 pieces place by long side.
Do you see? Here we will make the wings for the swan.
10:27 Making the first swan wing.
Put on 8 pieces in the place where I’m showing you. This is the section between the two pieces that we put on the short side.
Then put 7 pieces on these 8 pieces.
Now put on 6 pieces.
Now put on 5 pieces.
Now put on 4 pieces.
Then three, two and one.
12:41 Making the second wing.
Now slide the 8 pieces on the opposite side.
Now put on 7, 6, 5 pieces and so on.
The second swan wing is ready!
14:14 Making a swan's tail.
Slip two pieces onto one short piece with one pocket. Also put them on with the short side out. And then, secure them with one piece with the short side out.
14:36 Making the neck. Put the pieces on top of each other. Make 31 pieces in the neck of this graceful bird.
Hook the neck slightly at the end.
14:59 Making a beak. When you have 31 pieces in swan’s neck then put on one pink piece. Bend the neck.
Find one piece that we put on the short side. And flip it over. Put swan’s neck on it.
Straighten your neck.
This is what you should have.
If you give a swan to someone or decorate a wedding table with them, then it is better, of course, to glue this swan.
By the way why did you do such a craft? Maybe you will give swans?
Write in the comments.
If you’ve made 3D origami swan, then share its photo on social networks with the tag #Arthur3Dorigami
Thank you for watching our video tutorials! Come to the channel more often! I think you will find a lot of interesting things for yourself!
And don’t be afraid to put your likes or write comments.
See other video tutorials:
HOW TO MAKE AN ORIGAMI and other DIY PAPER CRAFT
[ Ссылка ]
HOW TO MAKE 3D ORIGAMI: clearly tutorials by Arthur 3D origami channel
[ Ссылка ]
