📲 Buying via app is always cheaper than on the website!
*❱❱ Install the AUTODOC app* — [ Ссылка ]

*🛠️ Products you'll need for the job:*
🔸 Suspension arm — [ Ссылка ]
🔸 Arm bushes — [ Ссылка ]
🔸 Ball joint — [ Ссылка ]
🔸 WD-40 Penetrating oil — [ Ссылка ]

Handling of the BMW E30 325i Turbo got even better after the installation of the Wisefab suspension kit. The step-by-step replacement of the lower front arm, tie rod, and tie rod ends - in the video which is part of the special AUTODOC project.

0:00 — How to replace the suspension on a BMW E30 Turbo
0:12 — Place the wheel chocks
0:15 — Loosen the wheel nuts
0:18 — Raise the car or place it over an inspection pit
0:20 — Unscrew the wheel nuts
0:25 — Remove the wheel
0:27 — Unscrew the fastener connecting the suspension arm to the steering knuckle
0:51 — Unscrew the fastener connecting the anti-roll bar link to the suspension arm
0:58 — Detach the suspension arm from the steering knuckle
1:06 — Unscrew the fastener connecting the tie rod end to the steering knuckle
1:15 — Detach the tie rod end from the steering knuckle
1:19 — Unscrew the fastener of the brake caliper bracket
1:25 — Remove the brake caliper bracket assembly
1:49 — Unscrew the arm from the subframe and the car body
1:57 — Separate the arm ball joint from the subframe
2:18 — Press the bushing out of the suspension arm
2:30 — Clean the bushing mounting seats
2:40 — Press the new bushing into the suspension arm
2:57 — Install the mounting bolts connecting the new arm to the steering knuckle
4:05 — Unscrew the tie rod end and remove it, using an adjustable spanner and a combination spanner
4:30 — Treat the mounting seats of the tie rod end
4:40 — Screw in a new tie rod end from the Wisefab front suspension kit
5:00 — Install a new suspension arm from the Wisefab front suspension kit and screw in its fasteners
5:22 — Attach the tie rod end to the steering knuckle and screw the fastener in
5:57 — Install the brake caliper bracket assembly
6:01 — Screw the brake caliper bracket fastener in
6:11 — Put the wheel back on
6:14 — Screw in the wheel mounting bolts
6:17 — Lower the car
6:20 — Tighten the wheel mounting bolts crosswise
6:22 — Remove the wheel chocks

⚡ AUTODOC CLUB — [ Ссылка ]

If you're interested in our content, you can watch our other video:
► [ Ссылка ]
► [ Ссылка ]

_#autodoc #autoparts #carrepair_

*Disclaimer:*
This video is intended for informational purposes only and does not guarantee achievement of a specific result.

It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.

This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.

© 2021 AUTODOC GmbH All rights reserved

свернуть