Buy Now!
New Strut & Spring Assembly Set from 1AAuto.com [ Ссылка ]

Loaded shock assemblies are a complete bolt-in package designed to install easily. You don’t need to worry about compressing springs, or specialty tools. TRQ loaded shocks and struts are designed to fit your vehicle, so after the job is done, you’ll never think about it again. This video shows you how to install a new TRQ loaded shock assembly into your 2012-15 Chevy Cruze.

• Check here for more videos on the 2008-16 Chevy Cruze: [ Ссылка ]

This repair was done on a 2013 Chevrolet Cruze LS 1.8L and the process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze

Tools you will need:
• Pry Bar [ Ссылка ]
• 18mm Wrench
• 24mm Wrench
• 18mm Socket
• 19mm Socket
• 24mm Socket
• Torque Angle Gauge
• Locking Pliers [ Ссылка ]
• 1/2 Inch Impact Gun [ Ссылка ]
• T35 Torx Socket
• T50 Socket
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• 15/16 Inch Wrench
• Rust Penetrant
• Floor Jack [ Ссылка ]
• Grinder
• Hammer

Subscribe: [ Ссылка ]

Check out our playlist:
Chevy Cruze 2011-2015 1st Gen: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть