Buy Now!
New CV Axle Assembly from 1AAuto.com [ Ссылка ]
This video shows you how to install a front CV axle assembly on your 1995-2001 Ford Explorer. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This repair was done on a 1997 Ford Explorer Limited 5.0L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
1995 Ford Explorer
1996 Ford Explorer
1997 Ford Explorer
1998 Ford Explorer
1999 Ford Explorer
2000 Ford Explorer
2001 Ford Explorer
Tools you will need:
• Pry Bar [ Ссылка ]
• 16mm Wrench
• 15mm Socket [ Ссылка ]
• 16mm Socket [ Ссылка ]
• 19mm Socket
• 22mm Socket [ Ссылка ]
• 32mm Socket [ Ссылка ]
• Brake Caliper Hanger [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Side Cutters
• Torque Wrench [ Ссылка ]
• Brake Grease
• Gloves [ Ссылка ]
• Safety Glasses
• Drain Pan
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Rubber Mallet
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Ford Explorer 1995-2001 2nd Gen: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
