Installation
1. Before installing the bearing on the shaft, you must first unplug the fixing pin of the bearing jacket, and at the same time, polish the surface of the journal smoothly and clean, and apply oil to the journal to prevent rust and lubricate (allow the bearing to rotate slightly on the shaft).
2. Apply lubricating oil on the mating surface of the bearing seat and bearing, and install the bearing into the bearing seat. Then put the assembled bearing together with the bearing seat on the shaft. Push it to the desired position for installation.
3. Do not tighten the bolts that fix the bearing seat, and make the bearing housing rotate in the bearing seat. Also, install the bearing and seat on the other end of the same shaft, rotate the shaft a few times, let the bearing itself automatically find its position. Then tighten the bearing seat bolts.
Removal
1. Loosen the locking screw on the eccentric sleeve of the bearing with an Allen key, then insert a small iron rod into the counterbore on the eccentric sleeve of the top cover, and loosen the eccentric sleeve against the rotation direction of the shaft.
2. Loosen the bolts fixing the bearing seat. Remove the bearing together with the bearing seat from the shaft. Note that before disassembling the bearing seat at one end of the shaft, the bearing seat bolt at the other end of the shaft should be loosened to avoid damage to the bearings at both ends.
Before installing or disassembling the bearing, you should master some basic operating knowledge to avoid the loss caused by the blind operation.
