Buy Now!
New Ball Joint from 1AAuto.com [ Ссылка ]
New Ball Joint Set from 1AAuto.com [ Ссылка ]
This video shows you how to install new, quality TRQ ball joints on your 1993-1997 Ford Ranger. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This repair was done on a 1996 Ford Ranger XL 3.0L Extended Cab Pickup 2-Door RWD and the process should be similar on the following vehicles:
1993 Ford Ranger
1994 Ford Ranger
1995 Ford Ranger
1996 Ford Ranger
1997 Ford Ranger
Tools you will need:
• Pry Bar [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 21mm Socket
• 27mm socket [ Ссылка ]
• Air Compressor
• Ball Joint Press
• Brake Caliper Hanger [ Ссылка ]
• Pliers
• Side Cutters
• Snap Ring Pliers
• 1/2 Inch Impact Gun [ Ссылка ]
• 1/2 Inch Breaker Bar [ Ссылка ]
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• 15/16 Inch Wrench
• Drill
• Brake Grease
• Cloth Rags [ Ссылка ]
• Cotter Pin
• Gloves [ Ссылка ]
• Rust Penetrant
• Safety Glasses
• Brass Punch
• Center Punch [ Ссылка ]
• Sledge Hammer
Subscribe: [ Ссылка ]
Check out our playlist:
Ford Ranger 2nd Generation 1993-1997: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
