How to install
1.Before installation, please clean and dry the expected place, make sure the bottom of suction cup is clean.
2.To make sure it is in pre-installed state, please gently twist the knob cap in an Anti-clockwise manner until can not rotate.
3.Push the suction cup perpendicularly into the expected place, press the knob cap firmly to release air. ( At first installation, please remove the protective cover )
4.One hand keeps pressing the centre firmly, another hand vigorously twists the knob cap in a clockwise manner until lock and can’t twist. Then pull the suction cup left and right for testing.
5.Put “Suction Cup Mounting Side” of basket on suction cups and set it into gaps. Don’t have it filled until you wait for 24 hours after installation and make sure it’s stably mounted on wall. Suggested minimum distance between two suction cups' center: 8 Inch

How to remove
1.Withdraw the basket from the suction cups.
2. Twist the knob cap in an Anti-clockwise manner until can not rotate.
3. Pull up on the release tab to release the suction and remove.
4. Wash the bottom of suction cup with water, reuse it after drying.

Attention Point
1.Our suction cup works by vacuum, through pressing the suction cup firmly on the wall to release air then twisting the knob cap tightly until lock in order to reach a vacuum state, not work by the glue. Sticky PVC bottom just for your easily placement.
2.You can search “Suction Cup Series Installation Step” on YOUTUBE to watch the installation videos.

свернуть