In this video I will show you how to design the simple square hex nut bolt in Solidworks which is very useful for the modelling feature...
A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together.
In applications where vibration or rotation may work a nut loose, various locking mechanisms may be employed: lock washers, jam nuts, specialist adhesive thread-locking fluid such as Loctite, safety pins (split pins) or lockwire in conjunction with castellated nuts, nylon inserts (nyloc nut), or slightly oval-shaped threads.
Square nuts, as well as bolt heads, were the first shape made and used to be the most common largely because they were much easier to manufacture, especially by hand. While rare today[when?] due to the reasons stated below for the preference of hexagonal nuts, they are occasionally used in some situations when a maximum amount of torque and grip is needed for a given size: the greater length of each side allows a spanner to be applied with a larger surface area and more leverage at the nut.
I hope you like it ..💐
THANKS FOR WATCHING
#cadcam #nutandboltsolidworks
#nutandboltassembly
#cadcamtutorial
#nutandboltdesign
Solidworks tutorials| Design of Nut and Bolt in Solidworks
Теги
SolidworksSolidworks tutorialsSolidworks sketchSolidworks assemblySolidworks tutorials thread featuresSolidworks tutorials standard nut and boltSolidworks tutorials nut and bolt animationHow to properly applied nut and boltHow to use thread command in SolidworksHow to make threaded bolt and nutDesign screw in SolidworksHow to apply screw mate in Nut and bolt in SolidworksNut and bolt designSolidworks Nut and bolt design for begineers begineers