In this UPDATED video I introduce the MSAFE-T kit for the P320 (available now through WWW.SIGMECH.STORE and other retailers) and review the step-by-step methods I use in order to convert a previously non-manual safety P320 so that it can accept a factory manual safety lever assembly with the same specs found on the M17 or M18 models. Please note that although the MSAFE-T kit will work to convert ANY non-manual safety FCU, the grip cutting tool however is specifically made for the X-Series (and T-TEN) grip modules. (Standard grip template coming in 2024!).

CHAPTERS:
0:00 - Intro
2:59 - Disclaimer
3:40 - MSAFE-T Package Contents
5:20 - Required Project Tools
6:33 - Optional Project Tools
6:51 - Required PPE

INSTALLATION:
7:28 - FCU Template Installation
13:41 - Grip Template Installation

FCU:
19:02 - FCU Pre-Cutting Information
27:14 - FCU Cutting Process
29:22 - FCU Manual Safety Test Fitting
32:59 - Manual Safety Assembly Installation

GRIP:
37:30 - Grip Pre-Cutting Information
39:28 - Grip Cutting Process
41:07 - Grip Module Troubleshooting

POST WORK INFORMATION:
46:01 - FCU/Grip Test Fitting
46:47 - Outro

FCU DISASSEMBLY:
[ Ссылка ]

FCU REASSEMBLY:
[ Ссылка ]

* The MSAFE-T Tooklit is designed by Sig Mechanics and sold through SIGMECH INC. All parts must be installed and inspected by a qualified gunsmith in accordance to all local, state and federal laws. By installing and/or using the MSAFE-T, you are agreeing to take full and complete responsibility for any and all legal, health and warranty consequences that may be incurred. INSTALL AT YOUR OWN RISK *

свернуть