Buy Now!
New Control Arm with Ball Joint from 1AAuto.com [ Ссылка ]
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2014-2021 Mazda 6. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This repair was done on a 2014 Mazda 6 Grand Touring 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2014 Mazda 6
2015 Mazda 6
2016 Mazda 6
2017 Mazda 6
2018 Mazda 6
2019 Mazda 6
2020 Mazda 6
2021 Mazda 6
Tools you will need:
• Pry Bar [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• 32mm Socket [ Ссылка ]
• Ratchet [ Ссылка ]
• Swivel
• Anti-Seize Grease
• Block of Wood
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Jack Stands [ Ссылка ]
• Pole Jack
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Mazda 6 3rd Generation 2014-2021: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
