B1P-23-E | Siemens NX 2007 Tutorial Modeling | How to create a variable edge blend in NX. With this expert course you will deepen your knowledge of edge blending. Using the Variable Radius option, the value of the radius can be changed at defined positions.
In the course, based on a practical example, the inlet radius in the corners of a drawing die is to be given a larger radius than the radius at the longest edges. The positions of the transitions are defined with points in this example.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: [ Ссылка ]
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on YouTube. (and about your subscription ;-) [ Ссылка ]
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: [ Ссылка ]
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Content
00:00:08 Foreword
00:00:41 Create base body
00:02:36 Create rectangular opening
00:03:48 Example for variable Radius
00:05:07 Create points
00:07:01 Variable edge blend
00:09:26 Clearence
00:10:04 Drawing gap
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on [ Ссылка ]
#learnNX #SiemensNXfreeCourse
