Buy the Yamaha 60HP prop seals and O-ring here: [ Ссылка ]
John will show you how to replace the prop seals on your Yamaha outboard in this video from Boats.net.
You don’t need to remove the lower unit to change the prop seals on your Yamaha 60HP outboard, but we’ve removed ours to take care of some other jobs. See how here: [ Ссылка ]
We’ll start by draining the fluid out of the lower unit. then , we’ll get to work removing the output shaft carrier. Once we’ve got it removed, we’ll tackle the oil seals. There are two, and they sit next to each other in the housing assembly. We’ll also replace the O-ring.
Then we’ll put it all back together again.
Once that’s done, you’ll need to refill the lower unit. Find out how to do that here: [ Ссылка ]
Here’s a look at the prop shaft assembly in this diagram on Boats.net: See this diagram for a better look at the Yamaha 60 water pump kit and how it fits together: [ Ссылка ]
Read how to do this job step by step: [ Ссылка ]
VIDEO HIGHLIGHTS:
Draining the lower unit - 0:40
Removing the output shaft carrier - 1:25
Pulling the carrier - 2:25
Removing the oil seals - 3:40
Replacing the O-ring and seals - 4:10
Replacing the carrier assembly - 5:20
Find Yamaha outboard parts here:
[ Ссылка ]
Talk to us:
Twitter: [ Ссылка ]
Facebook: [ Ссылка ]
Instagram: [ Ссылка ]
In the video we’re working with a 2003 Yamaha 60 HP 4-stroke outboard motor, but you may have similar steps for your Yamaha outboard. If you’re not sure whether these steps apply to your motor, leave a comment and we’ll get back to you.
