Performing a Carriage Reset can help with certain Service Code errors and sometimes help resolve banding. We recommend performing this only when advised by a technician as there are certain risks involved.

STEPS:
1. Enter the SP mode. (Press the up and down keys at the same time for 7 seconds, then press the OK key).
2. Using the Up and Down keys, Set the No. to 1, then press OK.
3. Using the left and right keys, select 3. Process then press OK.
4. Again, using the left and right keys, select 009 FUNCTION/MODE, then press OK.
5. Using the left and right keys, select 002 CARRIAGE CHANGE then press OK.
6. Select ON from the selection keys. ON will now be highlighted.
7. Power the printer off.
8. Replace the ink cartridges if required or have been advised to do so.
9. The printer will start the initial ink fill process and will take 6-7 minutes to complete.
10. Perform both the Paper Feed and Print Head Position Adjustment.

Follow us on social media!
Instagram: sawgrassink
Facebook: Sawgrass Technologies
TikTok: sawgrasssublimation
Pinterest: sawgrassink

Still need more support? Visit care.sawgrassink.com

свернуть