#djipocket3 #djimic2

Step-by-step how to link the DJI Mic 2 transmitter to any Bluetooth device.

Turn on the transmitter. (The LED light will be green)

Turn on the bluetooth device and make sure that bluetooth is turned ON.

On the DJI transmitter perform these functions:
1. Swipe down on the touchscreen.
2. Tap the Gear icon, then tap Wireless Mic.

This opens up the TX1 and TX2 level indicators: they'll be blank until linked up.

On the transmitter (TX) :
Turn the TX ON: Press and HOLD down the Power ON button for 2 seconds.
[ NOTE: If the TX has never been linked with the device before
the LED light will stay on green. ]
You must SWITCH the TX to bluetooth mode. To do this, press and hold the RECORD
BUTTON for 3 seconds. You will see the green LED light change to a blinking
blue light: you have now put the TX in the bluetooth mode.
Now press and hold the LINKING button for 2 to 3 seconds. Be patient.

When the bluetooth device is linked you will see a continuous SOLID BLUE
LED light. The Receiver (RX) should also populate the name of the device too.

свернуть