In this video I am going to show you Sump Pump installation with float switch that controller water level. By setup that sump pump operate base on level of the water.
There are two submersible pump Operate in the under ground water tank. That purpose is to drain out the water to the public irrigation.

Okay good evening everyone as the previous video we promised to to have a video that talked about the installation of the float switch and today we come up with the installation of the level 4 level of the float switch connect to two submersible pump okay now let's begin

Okay and here we have the new float switch in the plastic bag as you can see on the video and it's attach with some manual inside the plastic bag so before we jump into the installation so now I show you the what is the purpose of this installation now we have the four level of the float switch and there are two submersible pumps also in this irrigation tank and the purpose of this tank is to pump out all the water that flow inside this tank to the public public irrigation or public waste water I don't know how to call in English and because this room is the pump room that install underground so we cannot use the gravity so we need to use this submersible pump and now as you can see one float switch are already float

Okay and now I show you in the screenshot and now you can see is the first float switch begin to float so now when it gives the signal to the controller it will make the first pump running and then when another float switch reaches it level so it will give signal to turn the second pump work and then when it reach to the third level both pumps are running in high speed so then after that when the the forth level of the float switch reach its water level then the alarm will show so let's get back to the video and here you can see all the float switch and now reach its maximum level and the tank is full of water and you also can hear is the alarm sound and you can see the...

And you can see is….. here on the left is the green light is mean the the pump one here they said pump one is now operate and pump two is now also operate and here is the signal of the alarm that you can hear beep beep sound on the video and that is all for my summary so now let's go to the installation see some installation because I didn't take all the installation process so we just only have the few installation like this

And here as you can see on the video our install guide and now try to adjust the level of the float switch but you notice that all the yellow iron or yellow something I don't know they put in the wrong place because they put on the and they put it they put it here so it's supposed to be here and here here and here too this is to stop the float switch for not to rise up more so these four yellow are heavy enough to stop the float switch to come up on the above

And now you can see they already installed the yellow iron to the right place

And now the first float switch now already give the signal and let's see the first pump is going to operate

As you can see here the first pump operation are now green that's mean it start running after it reached maximum level so the alarm will alert to the service and we can come and check so now you can see both pump are running and the red alarm are also alarmed okay thank you everyone for your time watching this short video explaining how float switch control the submersible pump and I hope to see you again in the next video bye bye and have a nice day

Please also check out our related video in below link:
How Does a Float Switch Work | Water Level Controller
[ Ссылка ]


Please also follow us on our Facebook page: [ Ссылка ]

#Float Switch #Sump Pump

свернуть