Save the trip to the ford dealer with this DIY - use an unlocked APIM (Accessory Protocol Interface Module) *LINK BELOW* to enable your MyFord Touch (Ford Sync) screen to have factory NAVIGATION! OEM function, and absolutely legitimate.
Blog post with more detail here: [ Ссылка ]
Link to 2020/2021 A11 Maps SD card on Amazon here: [ Ссылка ]
Basically, all of our Ford Escapes have a GPS built in- if you have a roadside emergency, or want to look up your location in the "Information" section of MFT, you will still find that the car has a GPS coordination, or triangulation.
The APIM is the key to utilizing that hardware. The higher trim models have the feature unlocked, so if you can obtain a salvaged APIM from a higher model, you can UPGRADE YOUR MFT!
For a writeup, see this link: [ Ссылка ]
You can find APIM's on eBay, the above forum, etc.
It's a good workaround and can save you hundreds from going to the dealer.
***JUST MAKE SURE YOU DISCONNECT YOUR BATTERY. You don't want anything to short out during this process.
If you found this helpful, please LIKE and SHARE. SUBSCRIBE for more How-To's and reviews!
You can also check out the Facebook page and LIKE to have the updates there as well: [ Ссылка ]
Thanks a lot!
-Rahrena
How to Enable Navigation on Ford Sync 2: HOW TO ESCAPE
Теги
how to enable navigation on ford syncDIY Ford Factory Navigationmyford touch2013 ford escape sync 2 update2013 ford escape sync 2 hack2013 ford escape navigation upgrade2013 ford escape navigation sd card2013 ford kuga navigationford sync 2 unlock navigationford sync 2 navigation unlockFord escape navigation upgradehow to enable navigation on ford sync 2how to enable navigation on ford sync 32014 ford escape navigation2015 ford escape navigationsatnav