A plug-and-play LED Flasher Relay isn't the solution for everyone, and if you fall in that category, this is the video for you! Installing Load-Balancing Resistors can be tricky, so follow us as we guide you through the installation process.

For more info: [ Ссылка ]
Check out our Tech Tip on Relay vs Resistors here: [ Ссылка ]

Pricing or discounts mentioned in this video are subject to change.

Make sure to subscribe here: [ Ссылка ]
Follow us on Facebook here: [ Ссылка ]
Follow us on Instagram here: [ Ссылка ]
Follow us on Twitter here: [ Ссылка ]

Our relay will fix your flash rate problem caused by aftermarket signal lights and/or integrated tail light. If your signal lights flash too fast or do not flash, this part is your solution! Plug and play - easy installation. The relay comes preset to 85 cycles per minute. You can alter the flash rate to make it faster or slower. If you slip off the grey cover you can access an adjuster that will enable you to change the flash rate to your liking.

This component works with the following signal configurations:

- All stock
- Stock taillight, aftermarket signals
- Integrated taillight, stock signals
- Integrated taillight, aftermarket signals.

If you aren't interested in a plug-and-play TST Flasher Relay, our TST Load Balancing Resistors are your next best choice for controlling the flash rate of your TST LED Integrated Tail Light or TST LED Turn Signals. Simply use the tap-splice connectors to wire in the resistors and you are set to go.

свернуть