Cashback 7% (Aliexpress) - [ Ссылка ]
[ Ссылка ] - cooler with a radiator. How to clean the cooler and thermal compound to change their own hands at home. Substitution thermopaste on a processor.

1. Turn off the computer from the network.
2. Disconnect the cooler from the motherboard.
3. Turn latches counterclockwise by 90 degrees (depending on the design)
4. Raise the black clamps and remove the cooler from the radiator.
5. Thoroughly clean the surface of the thermal paste using cotton swab dipped in alcohol or other alcohol-containing liquid.
6. Vacuum and clean the fan and heat sink
7. Apply thermopaste on a surface processor or a radiator in a small amount.
8. plastic cards, a little pushing, spend from end to end. Ideally it should get a uniform layer at one time. Otherwise, the paste is distributed to obtain smooth and thin layer.
9. The paste should only be on the contact surfaces.
10. Carefully install the heatsink on the CPU cooler. Insert the white latches into the holes, lifting black locks and then pull them down and turn clockwise.
11. Connect the cooler.
12. Done!

/////////////////////// SUBSCRIBE \\\\\\\\\\\\\\\\\
[ Ссылка ]

Music:
Akhriat Play Progressive House "My Little Bedroom" - Progressive House - Original Mix
[ Ссылка ]
Creative Commons Licence
[ Ссылка ]

****** Thank you for the help channel *******
PayPal: Dikovinniy@yandex.ru
Webmoney (dollars): Z315805724463

свернуть