Buy Now!
New Strut & Spring Assembly from 1AAuto.com [ Ссылка ]

This video shows you how to install a front strut and spring assembly on your 2011-2019 Ford Explorer. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.

This repair was done on a 2015 Ford Explorer Sport 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer

Tools you will need:
• Pry Bar [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 21mm wrench
• 22mm Wrench
• 10mm Socket [ Ссылка ]
• 15mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• 22mm Socket [ Ссылка ]
• 24mm Socket
• Trim Tool Set [ Ссылка ]
• Locking Pliers [ Ссылка ]
• 1/2 Inch Impact Gun [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Driver
• Swivel
• Torque Wrench [ Ссылка ]
• Bungee Cord
• Gloves [ Ссылка ]
• Safety Glasses
• Hammer
• Ratchet Strap

Subscribe: [ Ссылка ]

Check out our playlist:
Ford Explorer 2011-2019 5th Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть