Buy Now!
New CV Axle Assembly Set from 1AAuto.com [ Ссылка ]

A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install the front driver side axle in your 2007-14 Ford Edge.

• Check here for more videos on the 2007-14 Ford Edge: [ Ссылка ]

This repair was done on a 2013 Ford Edge Limited 3.5L and the process should be similar on the following vehicles:
2007 Ford Edge
2008 Ford Edge
2009 Ford Edge
2010 Ford Edge
2011 Ford Edge
2012 Ford Edge
2013 Ford Edge
2014 Ford Edge

Tools you will need:
• Pry Bar [ Ссылка ]
• 21mm wrench
• 10mm Socket [ Ссылка ]
• 24mm Socket
• 36mm Socket [ Ссылка ]
• Pliers
• 1/2 Inch Impact Gun [ Ссылка ]
• Air Chisel
• Torque Wrench [ Ссылка ]
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags [ Ссылка ]
• Copper Anti-Seize
• Rust Penetrant
• Center Punch [ Ссылка ]
• Drain Pan
• Hammer
• Rubber Mallet

Subscribe: [ Ссылка ]

Check out our playlist:
Ford Edge 2007-2014 1st Gen: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть