[ Ссылка ]


Here is how to apply paint sealant on new cars:

1.Wash the car and dry

2.Optional step – Use the Righteous Rubber synthetic clay bar or traditional detail clay.

3.Apply the paint sealant (quarter size amount for an entire door) to a moistened foam or micro fiber applicator. (by keeping the applicator moist it will keep the applicator from absorbing sealant make spreading the professional paint sealant more efficient and waste less. (use filtered or distilled water or Purple glide or a detail spray)

4. Apply the paint sealant to a entire panel at once – entire door or fender or engine hood etc.

5. Let the paint sealant cure and haze – on a warm day 70F degrees this will only take 3-5 minutes.

6. Buff the area with the pro micro fiber towel. Remove the paint sealant haze with one side of the towel (folded in quarters) then quickly buff with another clean side.


You will notice that the paint sealant haze buffs to a shine with very little effort.
TIP: As you move around the car you may need to remoisten your applicator pad to apply paint sealant to new cars.
TIP: when removing the haze use a “chipping” motion and move from one side to the other side across the panel…rather than circular motions. This makes removing the haze much faster and keeps you from rubbing the dust back into the paint

OPTIONAL technique:
You may decide to clay your car prior to applying the sealant. Use either traditional detail clay or the Righteous Rubber synthetic clay bar.

Do one panel complete ( clay and sealant) at at time and work your way around the car. For instance – Clay a door then apply sealant, move to the next panel, fender ect then clay then apply sealant. This way you completely finish the panel in case you have to stop for the day and come back later.

So there you have it how to apply paint sealant to new cars. It’s a piece of cake and the easiest thing you can do for your modern clear coat paint finish.

Apply paint sealant to new cars
[ Ссылка ]

свернуть