Learn how to remove and replace the base enclosure for the HP ZBook 17 G5, G6 Mobile Workstation.
For other helpful videos go to [ Ссылка ] or [ Ссылка ]. More support options for your HP device are available at [ Ссылка ].
Before you begin: Remove the service door, battery, 2.5in storage drive assembly, and optical drive.
Removal
IMPORTANT: If the 2nd and/or 3rd M.2 solid state drive is installed, they will need to be removed before the base enclosure can be removed.
Remove the three 8 mm P1 Phillips-head screws identified with keyboard icon that secure the keyboard to the top cover.
Loosen the four captive T8 Torx-head screws that secure the base enclosure to the top cover.
Remove the ten 8 mm T8 Torx-head screws that secure the base enclosure to the top cover.
Remove the three 2.5 mm P0 Phillips-head screws in the optical drive bay that secure the base enclosure to the top cover.
Carefully separate the edges of the base enclosure from the top cover.
Remove the base enclosure.
Reverse this procedure to install the base enclosure.
Caution: Improperly installing or replacing parts could damage your HP device or void your warranty. Before replacing any parts, check your warranty.
Continue the Conversation:
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
#HPSupport #HPComputerService #HPzbook #HP
SUBSCRIBE: www.youtube.com/HPSupport
SHOP NOW: [ Ссылка ]
HP PARTS STORE: [ Ссылка ]
About HP:
HP Inc. creates technology that makes life better for everyone everywhere - every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: [ Ссылка ]
Like HP on FACEBOOK: [ Ссылка ]
Follow HP on TWITTER: [ Ссылка ]
Follow HP on INSTAGRAM: [ Ссылка ]
Follow HP on LINKEDIN: [ Ссылка ]
This video was produced by HP.
