For More Info visit us at: [ Ссылка ]
This video shows you how to change the rear backing plate on your 2011-2018 Ram 1500.
This repair was done on a 2016 Ram 1500 SLT 3.6L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2011 Ram 1500
2012 Ram 1500
2013 Ram 1500
2014 Ram 1500
2015 Ram 1500
2016 Ram 1500
2017 Ram 1500
2018 Ram 1500
🔧 List of tools used:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 21mm Socket
• 22mm Socket [ Ссылка ]
• 8mm Socket [ Ссылка ]
• Brake Caliper Hanger [ Ссылка ]
• Trim Tool Set [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Brake Parts Cleaner
• Cloth Rags [ Ссылка ]
• Copper Anti-Seize
• Gear Oil
• Gloves [ Ссылка ]
• Pipe Thread Sealer
• RTV
• Safety Glasses
• 14mm Hex Socket
• Drain Pan
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Magnet - Extendable
• Razor Blade / Gasket Scraper
• Wheel Chocks
Subscribe: [ Ссылка ]
For More Info visit us at [ Ссылка ]
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
