Want exact jetting specs to tune your nibbi carb? We show the best setup for your chinese pit bike carb to make it run at max performance without bogging or cutting out. This is for NIBBI racing PE22mm and PE24mm carburetors and will work on most chinese 110cc and 125cc pit bikes such as SSR, Xpro, Coolster, Taotao, apollo, and more! This is a must see video on tuning and jetting to get your bike dialed in where it runs best! Don't listen to others saying 26mm is better, they will not work. We do a sound test of each bike and carb as well. We are located in Wisconsin and our altitude may be different than where you are at, this will cause jetting to change slightly!
PE22mm FL Specs:
125cc Pit Bike
Premium 91 Octane Fuel
Main Jet: 102
Pilot Jet: 40
Needle Clip: 4th or 5th Pos. (I ended up with 4th)
Air Screw Setting: 1.5-2.0 Turns Out
Stock Intake W/ Plastic Spacer
PE24mm FL Specs:
125cc Pit Bike
Premium 91 Octane Fuel
Main Jet: 108
Pilot Jet: 45 or 48 (We had 48, its a little rich)
Needle Clip: 4th
Air Screw Setting: 2 Turns Out
Stock Intake W/ Plastic Spacer
Thanks for Watching!! If You Enjoyed, Consider Hitting the Subscribe Button and Clicking on The BELL!!
CHECK OUT NIBBI RACING HERE & CARBURETORS IN THE LINKS BELOW!
[ Ссылка ]
Jet Kit Pilot & Main Jets
[ Ссылка ]
[ Ссылка ]
NIBBI Carburetor PE22FLmm (Choose Size When Purchasing to Make Sure You Order 22mm)
[ Ссылка ]
NIBBI Carburetor PE24FLmm, Flange Motorcycle Engine with Carb Jets
[ Ссылка ]
NIBBI Twists Throttle Grip,Dirt Bike Grips with Throttle Cable and Handlebar Grip for SSR125 Pit Bike, 22mm Motorcycle Throttle Assembly
[ Ссылка ]
NIBBI Motorcycle Air Filter,Universal Air Filters for Dirt Bike,48mm
[ Ссылка ]
NIBBI Ratchet Tie Down Straps:
[ Ссылка ]
Nibbi CNC Replacement Orginal Intake Manifold CG Engine
[ Ссылка ]
NIBBI 7/8 Dirt Bike Throttle Lock on Throttle Universal Motocross for Pit Bike
[ Ссылка ]
Nibbi 7/8Inch (22mm) Motorcycle high Sensitivity Throttle Tube,
[ Ссылка ]
Check Out Products We Use:
*Snowmobile Grips
[ Ссылка ]
*GoPro Batteries
[ Ссылка ]
*ATV Grips
[ Ссылка ]
*Pit Bike Carburetor (Better Performance)
[ Ссылка ]
*Dango Designs GoPro Mount
[ Ссылка ]
*SC1 Gloss Coating
[ Ссылка ]
*Pit Bike Tall Seat
[ Ссылка ]
*Fuel Filters
[ Ссылка ]
*Pit Bike Racing CDI/Coil
[ Ссылка ]
*Pit Bike Air Filter
[ Ссылка ]
*Dirt Bike Grips
[ Ссылка ]
* In-Line Spark Tester
[ Ссылка ]
*TRX450R Lowering Link(Front and Rear)
[ Ссылка ]
*Customizeable Pit Bike Graphics Kit
[ Ссылка ]
*Pit Bike Exhaust 28mm
[ Ссылка ]
Purple Panda GoPro Microphone
[ Ссылка ]
#pitbike #nibbi #ssr #tuning #jetting #howto #apollo #dirtbike #tutorial #racing #exhaust
*Follow Us on Facebook [ Ссылка ]
*Wisconsin
*Snowmobiles, Quads, Bikes, & MORE
