Buy Now!
New Brake Caliper from 1AAuto.com [ Ссылка ]
This video shows you how to install new rear brake calipers from TRQ on your 2003-2007 Infiniti G35. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This repair was done on a 2005 INFINITI G35 X 3.5L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2003 INFINITI G35
2004 INFINITI G35
2005 INFINITI G35
2006 INFINITI G35
2007 INFINITI G35
Tools you will need:
• Pry Bar [ Ссылка ]
• 10mm Wrench [ Ссылка ]
• 8mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 12mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• Locking Pliers [ Ссылка ]
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Impact Gun
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags [ Ссылка ]
• Gloves [ Ссылка ]
• Paper Towels [ Ссылка ]
• Safety Glasses
• Drain Pan
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Infiniti G35 3rd Generation 2003-07: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
