Buy Now!
New CV Axle Assembly from 1AAuto.com [ Ссылка ]

This video shows you how to install a new front right cv axle assembly from TRQ on your 2004-2009 Audi A4 Quattro (2.0L L4). A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

Estimated installation time for a professional technician is approximately: 1 hour 54 minutes

This repair was done on a 2007 Audi A4 Quattro Base 2.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2004 Audi A4 Quattro
2005 Audi A4 Quattro
2006 Audi A4 Quattro
2007 Audi A4 Quattro
2008 Audi A4 Quattro
2009 Audi A4 Quattro

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 16mm Wrench
• 16mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• M10 Triple Square Bit
• Triple Square M10 Bit
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Impact Gun
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Complete Hex Socket Set
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Punch
• Rubber Mallet
• Wheel Chocks
• Wire Brush [ Ссылка ]

Subscribe: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть