In this episode we turn faded / sun burnt gelcoat into "like new" through a simple process of wetsanding and polishing/buffing ! This is great for spot repairs, replacing old decals, or overall, improving the look of your boat! Details and keypoints listed below!! Enjoy and be sure to hit the like button/comment/or subscribe if you enjoy this and want more!

Products used:
1. 2 half sheets of 3m Westsand 800 grit paper
2. Harbor freight Bauer multispeed buffer
3. wool buffing pad
4. Super Cut Buffing Coumpound (easily substituted with a gritty compound)
5. small 3m or durablock foam sanding block
6. PATIENCE!!

The process:
-I start off ALWAYS with a clean/debris free surface
-Start by presoaking your wetsand paper 10-15 min
- begin wetsanding process while continuously wetting/dunking your paper into the bucket
KEYPOINT: sand in a cross hatch pattern always
-for this video I wetsanded a 1 sq ft area for approx 5-10 min until uv fading was gone
-clean and dry surface/inspect for missed areas
-begin spreading your buffing compound by hand (gloves recommended)
-work 1-2 sq ft area at a time, starting with a 800-1000 rpm buffer speed, being patient, letting the buffer and compound do its job.
-intermittently check the surface temp with the back of your hand, should be warm to touch, not super hot
-wipe off residue with a clean rag, inspecting the buffed area for sand scratches
-continue the buffing process multiple times until all sand scratches are gone and desired gloss level is achieved
-bada boom bada bing!!!! youve got a kickass, color rich surface!
-apply an automotive type wax to protect from future fading!

Thanks for watching and feel free to comment or message with questions!

fiberglass gel coat gelcoat buffing polishing repair restoration

MUSIC by : epidemic Sound

свернуть