Pilotech YC-019 pilotscale spray dryer is capable of processing 5000ML per hour, and it only needs a minimum amount of 100ML materials to perform one experiment. Is suitable both for laboratory use and the pilot plant use. The inlet air temperature for the YC-019 pilot scale spray dryer ranges from 110 to 350 °C. As the range is relatively wide, it is suitable for drying the spray of most materials. After the drying process, the particle size ranges from 1 to 100 microns, so it is suitable for the spray drying of ceramics and catalysts.
All our Spray Dryers are designed to meet the strictest requirements for health and safety and environmental protection, so working with us provides you with the best solutions on the market. We examine your product and its properties, analyze the risks according to well-established safety procedures and recommend the safety concept that is best suited to your situation.
YC-019 pilot scale spray dryer Controls & Functionality
YC-019 pilot scale spray dryer is designed to ensure that all functions are simple to select and adjust, to quickly achieve the optimum conditions for spray drying. Both use a clear touch screen display , the operator can control the following functions: Inlet Temperature Airflow Volume Air compressor flow Pump Speed De-blocker Frequency
YC-019 pilot scale spray dryer Easy to use
Color Touch Screen,Fast setup and cleaning times Scale up to pilot or industrial scale possible.
Visible process due to glass assembly Adjustable particle size (1 – 100 microns) YC-019 pilot scale spray dryer Two Fluid Nozzle with SUS316L stainless steel YC-019 pilot scale spray dryer Two Fluid Nozzle with SUS316L stainless steel The stainless steel spray assembly consists of an inner tube for the liquid sample leading to a small diameter jet. An outer tube directs compressed air to the nozzle. All units are supplied with 0.7mm jets, other sizes are available as accessories.The spray assembly incorporates an automatic de-blocking device that prevents the jet nozzle from becoming blocked, the de-blocking needle is activated by an integral compressor. De-blocker is sometimes necessary with materials which may solidify or when large particles in suspension cause blockages in the jet. High recovery rate With only one cyclone separator, recovery rate is always a problem with lab spray dryers and it is difficult to improve recovery even with two cyclones.
With the structured redesigned, YC-019 pilot scale spray dryer can reach a maximum recovery rate of 92%, excellently solving the problem of low recovery. Temperature protection The heater has an extreme high temperature when experiment finished, which needs air blower to continue working in order to reduce the inside temperature and ensure the safety of equipment, YC-018 spray dryer can control air blower running automatically, even the operator wants to turn off the air blower, the system would prevent the operator until the temperature of system reduce to the default security state.
If you are interested in YC-019, please contact us for more information.
And don't forget to subscribe our channel, Thank you.
For more information, please visit our website:[ Ссылка ]
For more videos of our products, please check:
YC-015 Mini spray dryer: [ Ссылка ]
YC-310 spray granulator: [ Ссылка ]
YC-3000 spray freeze granulator: [ Ссылка ]
YC-1800 Lab low temperature spray dryer: [ Ссылка ]
Thanks for watching.
