Shop for New Auto Parts at 1AAuto.com [ Ссылка ]
Valve cover gaskets keep a tight seal between the engine head and the valve cover. This prevents oil from escaping, and water and debris from entering. Seeping oil around the top of your engine is one sign the gasket may be worn out. This video shows you how to install a new valve cover gasekt on your 2007-2011 Honda CR-V.
• Check here for more videos on the 2007-2011 Honda CR-V [ Ссылка ]
This repair was done on a 2011 Honda CR-V EX 2.4L Sport Utility 4-Door and the process should be similar on the following vehicles:
2007 Honda CR-V
2008 Honda CR-V
2009 Honda CR-V
2010 Honda CR-V
2011 Honda CR-V
Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• 10mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• Hose Clamp Pliers [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Driver
• Socket Extensions [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Paper Towels [ Ссылка ]
• RTV
• Hammer
• Pick [ Ссылка ]
• Razor Blade / Gasket Scraper
Subscribe: [ Ссылка ]
Check out our playlist:
Honda CR-V 3rd Generation 2007-2011: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
