This video is a Step By Step on how to fit Pro Taper Bars to your MT-07 (Mine are CR Highs). This is the first time I have done something like this and it was a lot easier than I thought. Big shout out to @gringostyl for helping me get it sorted. Hope this video helped you out, see Step By Step guide below. Make sure you Like, Comment & Subscribe!😀
CR High - Pro Taper SE Seven Eighths Handlebars: [ Ссылка ]
Step By Step:
1) Firstly remove all handlebar components
- Loosen bolts on left bracket that holds clutch lever
- Remove switch gear on left side of handlebars
- Remove bar ends both sides
- Cut grips off of bars
- Remove throttle cable casing
- Loosen bolts on right bracket that holds brake lever
- Loosen switch gear on right side of handlebars
2) Now loosen bolts holding LED screen and hang it out the way on the right side of the bike
3) Loosen handlebar bolts so it moves freely
4) Remove throttle tube from handlebars
5) Slide left bracket holding clutch lever off of the handlebars
6) Remove bar pad and brackets from Protaper bars
7) Slide left bracket holding clutch lever and throttle tube on the right side onto the Protaper bars
8) Tighten handlebars to your riding position
9) Use masking tape and a marker to mark your drill points for the switch gear
10) Drill both drill points on each side of handlebars
11) Replace all components onto the Protaper handlebars
- Switch gear on both sides
- Right bracket holding brake lever
- Attach throttle cable casing
12) Install grips on both sides using Grip glue/ Hairspray
13) RIDE IT LIKE YOU STOLE IT!!!
Sponsorships:
[ Ссылка ]
Join the community: [ Ссылка ]
Socail Media:
TikTok:
Personal ~ [ Ссылка ]
BrapLifeClothing ~ [ Ссылка ]
Instagram:
Personal ~ [ Ссылка ]
BrapLifeClothing ~ [ Ссылка ]...
My Motovlog Setup:
GoPro: [ Ссылка ]
Mic Adapter: [ Ссылка ]
My Mic: [ Ссылка ]
Comms Device: [ Ссылка ]
Team Links:
TarzanMotoVlogs:
YouTube - [ Ссылка ]...
TikTok - [ Ссылка ]
Reece:
Tiktok - [ Ссылка ]
Jewls:
Instagram - [ Ссылка ]
YouTube - [ Ссылка ]
Sparko:
TikTok - [ Ссылка ]
*Disclaimer* - WHOLE VIDEO IS EITHER FILMED IN MEXICO OR ON A GREEN SCREEN
INSTALLING PRO TAPER BARS ONTO MY MT-07!
Теги
MrBrapzMr BrapzYamahaYamaha MT07MT07 AkrapovicMT-07SupermotoYZ250FMotovlogDirtbikeMotovloggerBikelifeUK MotovlogUK BikelifeMT07 MotovlogUK MotovloggerMTMT07 WheelieYZ250 WheelieMotorbikeMotorcycleVlogMotorcycleVlogNakedBike2019 Yamaha MT07DirtbikeVlogHonda CRF450RHonda Vs YamahaMT07 review2019 mt 07 reviewYAMAHA MT07 REVIEWCustomizeModificationPROTAPERHandlebarMT07 Stunt BuildStuntStep by step guideHandlebar installation