Carved on a 1000mm X-Carve
Centre datum.
1st pass - 1/16" spiral upcut (should have been downcut) one pass at 1mm depth, running 1800mm/min. Around 30mins.
2nd pass - 90° vBit pass as 1mm running 1500mm/min. Around 45mins.
Re-carved the outer rectangle, with the vBit as 2mm depth.
Paint is scruffy brushed with black acrylic. This will get a second coat before varnish.
Apologies for the length of this clip; I couldn't see how to alter the time lapse speed.
For more, please LIKE/SUBSCRIBE and follow us on mainstream socials at @CNCSawdust
