Buy Now!
New Tie Rod Set from 1AAuto.com [ Ссылка ]
New Tie Rod from 1AAuto.com [ Ссылка ]
This video shows you how to install an inner tie rod on your 2008-2013 Nissan Rogue. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
This repair was done on a 2009 Nissan Rogue S 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue
Tools you will need:
• Pry Bar [ Ссылка ]
• 22mm Wrench
• 17mm Socket [ Ссылка ]
• 21mm Socket
• 22mm Socket [ Ссылка ]
• Locking Pliers [ Ссылка ]
• Pliers
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Hammer
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Nissan Rogue 2008-13 1st Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
