Please subscribe! Volvo V70 Mk2 2nd Gen Bumper Removal Guide. Walkthrough video.
You will need:
12mm socket
13mm socket + extender
T25 Torx
Drill approximately 5mm.
Take care when removing the 4 nuts through the bodywork via the boot as they can fall down and become hard to retrieve. Use a strong magnet on the end of your extended socket to prevent this.
At 2:17 when the audio cuts out you need to remove the T25 torx all the way until just a few threads remain and then push it back towards the rear of the car which gets the bracket out of the way.
If your Volvo is 04 or newer you may not need to drill out a rivet there may just be 2 Torx screws in the rear arch if I recall correctly.
If you'd like to support my channel please visit my websites and follow my socials:
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]
Thanks!
