In this video I show you how to build an American Flag out of wood. This is a DIY American flag made out of wood with the Pledge of Allegiance hand painted on the stripes. This is a beautiful piece of American Flag wall art. My wife added the lettering by hand. I make these flags out of spruce wood. I use red, white and blue water based stain for the colors on this .. The stars are painted using a stencil (see link below) and flat white spray paint. You will get a little over spray from the paint if you are not very careful. This is where distressing the flag helps. Check the links below for supplies and tool used in this build.

Cut list to build the flag:
6 - 1 1/2" strips cut 37" long
7 - 1 1/2" strips cut 22 1/2" long
Union cut 14 1/2" wide by 10 5/8" tall

You'll need 4 - 1 1/2" strips for the back running vertical to hold the flag together. These are cut 18 1/2" long. I use glue and brad nails to attach them to the back. The hanging hardware is attached to the outer 2 vertical strips.

Stains used in this build are from Sherwin Williams. I just had them mix me red, white, and blue stains. Colors are: MW-51 Navy Blue, Crimson Red, and just plain white stain.

Check out full resolution images of this build on my blog: [ Ссылка ]

Check out my Thin Blue Line Flag video here: [ Ссылка ]

Supplies used in this build:
General Finishes High Performance Top Coat: [ Ссылка ]
50 Stars Stencil: [ Ссылка ]
(I now sell a 1 time use stick on stencil that works well, available here: [ Ссылка ] )
Wood Glue: [ Ссылка ]
D Ring hanging hardware: [ Ссылка ]
Router Bits: [ Ссылка ]
Bench Dogs: [ Ссылка ]
Bench Dog Painting Cones: [ Ссылка ]
120 Grit Sandpaper: [ Ссылка ]
Johnson's Paste Wax: [ Ссылка ]
Valspar Antiquing Wax: [ Ссылка ]
Oil Based Paint Pens: [ Ссылка ]

Tools I recommend: [ Ссылка ]

Disclaimer: affiliate links are used in this description and they help support this channel. By clicking on the links and purchasing items through Amazon, provides me a very small commission but cost you nothing extra. It is a great way to support small creators like me. I appreciate the support more than you know!

Working with wood and power tools is inherently dangerous. Anyone using any of the tools or supplies used in these videos are personally responsible for learning the proper techniques involved, and he or she assumes all risks and accepts complete responsibility for any and all damages and injury of any kind.

Before using any hand or power tool with which you are unfamiliar, consult its operating instructions, and if necessary, seek instruction by a qualified person well versed in its operation and appropriate safety techniques.

731 Woodworks is intended for entertainment purposes only. There are no warranties implied and your results may differ from ours. You should NOT rely solely upon the information and techniques discussed and displayed in these videos. Rather, you should fully research each technique and decide for yourself what is the safest possible work method for you.

#diyflag #americanflag #flag

свернуть