Click for more info and reviews of this Durabilt Tie Down Anchors:
[ Ссылка ]
Check out some similar Tie Down Anchors options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Hello, neighbors and friends, Steven here with etrailer.com. Let's take a look at our Durabilt Forged Steel D-Ring Tie-Down Anchor. It's a weld-on application, 5/8 inches thick by three inches long, rated at 6,300 pounds. So, folks, this nice, heavy-duty D-ring tie-down anchor point's gonna provide you a nice solid attachment whenever it's welded in place, to then be able to attach ropes, chains, straps, those kinda things once this side is welded down in place, wherever you need it on your trailer. It does have the extended-length ring here. It's gonna accommodate large-diameter ropes, hooks and chains, and as I just showed you, it can rotate over 180 degrees back and forth so that you can attach multiple angles and those kind of things.
Now, it is forged steel, so it's gonna be a lot more resistant to wear and deformation than your standard thinner weld-on installation D-rings like it. Now, it does need to be welded onto a flat steel surface. It has a safe working load limit of 6,300 pounds. It is 5/8 inches thick. It is three inches inside, both ways.
And overall, I was getting about 4 5/8 inches long. And as far as the mounting bracket, I got about 2 1/2 inches long by about two inches wide. And, folks, that's gonna wrap it up. Just a quick look today at this Forged Steel D-Ring Tie-Down Anchor Weld-On. I'm Steven, thanks for watching.
.
