In this instructional video, we look at how high-feed profile ramping around an outside 2D profile compares to other approaches. Let's take a look at cycle time comparisons for:

1 - Traditional step-down profile milling.

2 - High-efficiency/dynamic milling with a round tool at full depth, stepping in towards the part profile.

3 - High-feed ramping starting at the top of a workpiece and executing a constant ramp as we go around the profile, until we reach the finished depth. Live-action video is shown of the high-feed ramping on a Haas 40-taper VM2.

We'll talk a little bit about the pros and cons of each approach to help you decide what works best for your shop. Visit our website for a more detailed examination: [ Ссылка ]

To discuss the best approach for your application, call us at (800) 243-3344, email info@dapra.com or request assistance on our website: [ Ссылка ]


#YourJobOurJob

свернуть