Crompton Instruments DC Ammeter Shunt presented by Katie Rydzewski for Galco TV. Buy the item featured in this video at 800-337-1720 or visit: [ Ссылка ]
The FI Series shunts from Crompton Instruments are separately mounted units used for extending measurements of current beyond the available limits of self‑contained DC ammeters.
FI Series Features:
- 50mV or 100mV Output
- 600 ~ 1200 Amperes
- +/- 0.25% Accuracy
- Busbar Mount
For more Crompton Instruments Shunts go to: [ Ссылка ]
And for the full line of Crompton Instruments visit: [ Ссылка ]
VIDEO TRANSCRIPT:
Welcome To G-TV!
Today I will be showing you Crompton Instruments DC Ammeter Shunts.
These shunts are separately mounted units used for extending measurement of currents beyond the available limits of self contained DC ammeters. The large capacity type switchboard shunt is designed for permanent installation in bus bar circuits. The lower capacity type is readily mounted on insulated or non-insulated panels.
Where possible, all shunts should be mounted on the ground side of the circuit. Panel mounted shunts with insulated bases must be mounted on the grounded side of circuits above 750 volts. Crompton's DC ammeter shunts are designed for use with 50 or 100 millivolt panel meters switchboard indicating or recording instruments, calibrated in terms of the ampere rating of the shunts. The millivolt drop of the shunt is adjusted at the factory within plus or minus .25 percent accuracy.
For continuous operation, the manufacturer recommends that shunts are not run at more than two thirds the rated current under normal conditions of use as per AIEEE standards.
Crompton Instruments DC Ammeter Shunts, along with thousands of other products and services are available at Galco.com
Galco is a Factory Authorized Stocking Distributor for Over 150 Brands of Industrial Electrical & Electronic Automation, Controls and Component Products; On-Site and Send-In Repair Services for Industrial Control & Automation Products for Over 2,000 Brands; Engineered Systems Integration, Retrofits & Upgrades for Variable Speed Drives, CNC, PLC Systems, Dynamometers & Test Stand Applications. Visit us online at http:// www.galco.com or call us at 800-337-1720.
[ Ссылка ]
With respect to the usage, installation or assembly of any products described in this video, Galco Industrial Electronics, Inc., a Michigan corporation, encourages you to follow the requirements and/or guidelines of: i) the Occupational Safety and Health Act of 1970, Public Law 91-596, as amended, and all laws, rules and regulations implemented in relation thereto; ii) the National Electric Code®; and iii) NFPA 70E®. Any installation, assembly or work described in this video should be performed by a qualified licensed electrician.
GTV, Galco, galco.com, Galco Industrial Electronics, and Galco Industrial Electronics, Inc. are registered and/or pending registered trademarks under the U.S. Patent and Trademark Office, assumed names, registered domain names, and/or trade names of Galco Industrial Electronics, Inc., a Michigan corporation.
LEGAL DISCLAIMER:
While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Galco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warrantees of performance, merchantability and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Galco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.
