In addition to removing cement mortar spillages and stains as well as cement grout residues from stone and porcelain paving, there is often a very annoying 'Cement Haze' left on the surfaces that stubbornly refuses to go and it seems like you just keep chasing it around your patio for it to show up again when it dries out! BRICK ACID SHOULD NEVER BE USED on Natural Stone or Porcelain Paving.
No more - The solution is to use a dilute solution (1 to 5) of NCC Cement & Cement Grout Remover and fresh water, before a final rinse with clean water.
Characteristics / Advantages:
- Supplied ready-to-dilute for use
- Acid-free formulation
- Water dispersed – Solvent free
- Fast-acting for quick results
- Removes ugly efflorescence salts
- Removes cement grout spillages
- Removes cement stains
Directions for use (Always Shake the Container Well Before Use):
As with all paving cleaning and surface treatments, we strongly recommend that you always test NCC Cement, Grout & Salts Residue Remover on an inconspicuous area prior to its general use. Always mask and protect any adjacent areas and materials that are not being treated. NOT SUITABLE FOR USE on any highly polished natural marble, travertine, or limestone surfaces.
Surface preparation: Ensure that the surface to be treated is completely clean and free from any dirt and dust before application. Where necessary wash the areas first with NCC Grime Remover ([ Ссылка ]), rinse well with clean water and allow time to fully dry.
Application for the removal of Cement Grout Haze:
- Dilute the NCC Cement, Grout & Salts Residue Remover 1:5 with clean cold water and apply liberally on the affected surfaces using a low-pressure spray unit or with a suitable brush.
- Allow the solution to work and react for around one hour at 20°C, do not allow to dry out, then pressure hose / jet wash off with clean water.
For other applications and heavier cement or efflorescence, please refer to our other video for this product here: [ Ссылка ]
Consumption / Coverage (per litre) for Grout Haze removal:
Approximately 15 – 25 m2 depending on the level and thickness of cement grout residue
For full information, product datasheet, application guidelines, and more project references and case studies etc., visit the NCC Cement, Grout & Salts Residue Remover Product Page of our website here: [ Ссылка ]
You can purchase this advanced paving cleaning material in our online shop here: [ Ссылка ]
For any additional advice and assistance on your paving projects, there is a lot of additional paving cleaning, sealing and jointing information on our website: [ Ссылка ]
You can also call our paving specialists on 01257 266696
