Using flexible 3D printer filament to make a replacement bottle jack retaining strap for the 4Runner.
To get a rough idea of the size of the retainer, I used a length of parachute cord loosely tied around the jack. Then measure the length of that loop of cord, dived by Pi and that's the diameter I started with. Later, I slightly increase that diameter for the final part to get a better fit.
Part file:
[ Ссылка ]
Cults3D:
TPU Filament:
[ Ссылка ]
or
[ Ссылка ]
If you're missing the clip and the rubber piece, you can pick those up on eBay, search for: "Toyota bottle jack retainer"
It appears that similar retainers were used on at least 1st - 3rd generation 4Runner (Surf), likely the similar vintage Pickup (Hilux) and at least the 1st generation Tacoma pickup models.
Paint:
- [ Ссылка ]
- [ Ссылка ]
More to come...
Subscribe for more content like this
Comment, like, share & click the bell icon
And as always, thanks for watching
