To perform a factory reset on your TP-Link Wi-Fi extender, you can follow these steps:
Locate the reset button: Look for a small reset button on your TP-Link Wi-Fi extender. It is usually located on the back or bottom of the device. The button may be recessed and require a pin or paperclip to press.
Power on the extender: Ensure that the extender is powered on and connected to a power source.
Press and hold the reset button: Use a pin or paperclip to press and hold the reset button for about 5 to 10 seconds. You may need to use some force to press the button, as it may be recessed.
Release the reset button: After holding the reset button for the designated time, release it.
Wait for the reset process: Allow the extender a few moments to complete the factory reset process. During this time, the device will reboot and restore the default settings.
Reconfigure the extender: Once the factory reset is complete, the extender will be restored to its original settings. You will need to set it up again to connect it to your router and configure the Wi-Fi settings.
Please note that performing a factory reset will erase all custom settings and configurations on your TP-Link Wi-Fi extender. Make sure to take note of any important settings or configurations before proceeding with the reset. #tplinkextender #tplink
Ещё видео!