LED Stair Light Strip Controller PIR Motion Sensor Addressable LED RGB Tape Lights for Control Each Stair Light,under cabinet
Product Parameters:
Input Voltage: DC5-24V
PIR Sensing distance:16ft-32ft (5m-10m)
Applicable Products:WS2812B,WS2811,1903 Dreamcolor LED light strips and so on.
Product instructions:
After the controller is powered on, the nixie tube will display "XX-L", "XX" represents the lighting speed of the addressable light strip, you can directly press SPEED- SPEED+ to adjust it to your appropriate speed.
When you need to adjust other parameters, press the "SET" key to enter the setting mode.
By pressing the "SET" key to enter the first item displayed as "LXXX", you can adjust the length of the addressable light strip. "XXX" at the beginning of L is 3 digits. These 3 digits are the number of beads of the light strip. The button SPEED- SPEED+ can be adjusted and supports up to 800 lamp beads.
After the adjustment is completed, press "SET" again to enter the second item of the setting and display "P-XX", adjust the light color of the addressable light strip, there are 32 different mode effects, options P-01 to P-32 .
Press "SET" again to enter "E-XX" to set the duration of the light strip's overall continuous lighting. E001-E999, the higher the number, the longer the light stays. It is also adjusted by pressing the SPEED- SPEED+ button (recommended to be set to E001)
Note: The light can be continuously lit for up to 999 seconds, and it cannot be continuously lit.
After adjusting all the settings, press the "SET" key to return to the initial display state of "XX-L". At this time, the controller will save a series of setting parameters you just made, and the saved setting parameters will be used next time you turn on the machine.
Order here [ Ссылка ]
Order here [ Ссылка ]
